B+F Schmierstoff GmbH

Speziell entwickelt für die professionelle Spülung von
Automatik-, CVT- und Direktschaltgetrieben

- Contamination of the injectors
- Condensation in the fuel system
- Gum build-up in the injection pump

Thoroughly cleans the valves and injectors
as well as the inlet area without dismantling.
Suitable for gasoline engines with
Direct injection.
scope of application
All petrol engines
consumption
300 ml for up to 40–60 l petrol
Application interval
Cleans and protects the injectors, every 6 months or every 10,000 km
to achieve cost savings
Provides cost savings through one
optimized fuel consumption
Increases engine performance for
maximum driving pleasure

MOTUL Motoröladditiv Hydrostössel Plege 300ml 

Verhindert den Druckverlust und reduziert störende Geräusche

Ultra high performance engine oil, specially developed for the latest generation of "DRIVE-E"
Petrol (VEP *) and diesel engines (VED **) from VOLVO. Also suitable for modern
Gasoline engines, where an engine oil according to ACEA A1 / B1 or ACEA C5 in the ultra-low viscosity class SAE 0W-20 is intended.
SPECIFICATIONS / STANDARDS
STANDARDS: ACEA C5
APPROVALS: Volvo Car Corporation RBS0-2AE
With the VCC RBS0-2AE, the engine oil must have an extremely high thermal load capacity
simultaneous optimal compatibility with the most modern exhaust aftertreatment systems
show low pollutants according to Euro-6. The particularly high requirements also apply
in terms of the flow behavior at very low temperatures to improve the
Cold start behavior and the reduction of CO2 emissions and fuel consumption. Here is
a demonstrable fuel consumption reduction of 3.4% compared to a reference oil in the
Viscosity SAE 15W40 required.
ACEA A1 / B1 (obsolete since 12/2018) describes Fuel Economy Full SAPS engine oils
significantly reduced HTHS viscosity (≥ 2.6 mPa * s). This will reduce fuel consumption
by ≥ 2.5% compared to a reference oil (RL191) with a viscosity of 15W40.
ACEA C5 describes Fuel Economy Mid SAPS engine oils with significantly reduced HTHS viscosity (≥ 2.6 mPa * s), xW-20, proven Fuel Economy ≥ 3.0%.
The approval VCC RBS0-2AE is specified especially for the service fill for all VOLVO models with "DRIVEE" drives of the VEA petrol and diesel engine family (Volvo Engine Architecture).
The layout of the lubrication circuit is for the modular 4-cylinder petrol and
Diesel engines with 2.0L displacement are identical. A fully variable oil pump with a solenoid valve,
which regulates the oil pressure depending on the speed, load and temperature, takes care of all
Operating conditions for optimal lubrication and minimizes losses in the lubrication circuit.
ADVANTAGES FOR THE ENGINE AND THE ENVIRONMENT
Ultra-low-viscosity viscosity class SAE 0W20, perfect cold flow behavior already enables in
excellent wear protection during the cold start phase.
Specially developed for the most modern, friction-optimized downsizing engine concepts.
High-quality synthetic raw materials guarantee a long service life and protect the
Engine even with long oil change intervals.
High lubrication security even under extreme thermal and mechanical loads.
Extremely low evaporation loss reduces oil consumption.
Significantly reduced HTHS viscosity and excellent smooth running properties are made possible
a noticeable fuel saving.
Clean combustion, no black sludge, excellent corrosion protection, thereby
perfect engine cleanliness.
High shear stability guarantees stable oil pressure under all operating conditions, protects the
Engine reliable against wear.
RECOMMENDATIONS AND NOTES
Change interval according to the specifications of the vehicle manufacturer or adapted depending on
Operating conditions.
Before use, it is essential to read the manufacturer's service documents and recommendations!
VEP * VOLVO Engine Patrol - Volvo petrol engine

»Note on the waste oil regulation:
Important information on the disposal of used oil:
You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes)
in the amount of fresh oil bought from us free of charge at our point of sale during operating hours:
Hand it in Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to:

B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen

Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations
of the shipping company, since waste oil is dangerous.
If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence.