Liqui Moly 21161 Brake fluid Dot 5.1

Synthetic brake fluid based on glycol ethers, alkylene polyglycols and glycol ether esters. It contains inhibitors that prevent the corrosion of metallic brake components and reduce oxidation at elevated temperatures. The brake fluid has a high wet and dry boiling point, which ensures safe braking even after a certain amount of moisture has been absorbed over a longer period of use. Special moisture flushing agents help to protect against the formation of vapour bubbles.

Ideally suited for use in all disc and drum brake systems, as well as clutch systems of motor vehicles for which a synthetic brake fluid of this specification is prescribed. The brake fluid is also suitable for use in ABS brake systems.

Application

Can be used in all conventional brake fluid bleeding devices. Miscible and compatible with all high-quality synthetic brake fluids. However, optimum service life is only guaranteed when used unmixed. It is recommended to change the brake fluid in accordance with the vehicle manufacturer's instructions.

Caution: Brake fluid attacks car paintwork; if spilt, rinse immediately with plenty of water. Do not use in mineral oil-based central hydraulic systems. The vehicle manufacturer's instructions must be observed.

H361FD Suspected of damaging fertility. Suspected of damaging the unborn child.

EUH210 Safety data sheet available on request

Liqui Moly 21204 Brake guide pin grease

Synthetic speciality lubricant for the assembly and repair of brake systems. Keeps guide pins running smoothly. Ensures optimum function and even wear of the brake pads. Dampens noise caused by vibrations. Keeps the rubber sleeves tight due to excellent elastomer compatibility and prevents the ingress of water and aggressive environmental influences. Protects against corrosion and ensures a long service life. Meets the requirements of various OEMs for greases for use on supported guideways.

 
For lubricating guide pins in floating calliper brake systems. If small quantities come into contact with brake fluid (DOT 3, DOT 4, DOT 4 LV/SL6 DOT 4, DOT 5.1), no negative impact on the brake fluid can be assumed.

Application

Clean the guide pins in advance with LIQUI MOLY Quick Cleaner and coat them after the solvent has evaporated.

H412 Harmful to aquatic life with long lasting effects.
EUH208 Contains 5,5'-dithiodi-1,3,4-thiadiazol-2(3H)-thione, naphthenic acids, zinc salts, basic. May cause allergic reactions.

Liqui Moly 21205 Wheel hub paste

Synthetic, metal-free release paste developed primarily to prevent the rims from welding or rusting onto the wheel hub.
When used correctly, the excellent adhesion prevents skidding even at high speeds.

Field of application
For centring rings on aluminium rims, joints between rims and wheel hubs, for plug-in connections and for repair and maintenance work on brake systems.

Minimum shelf life for original, closed container: 24 months

Application

Remove coarse soiling, oxidation layers or rust on the contact surfaces and connection points with a wire brush or with the aid of an emery cloth.
Then clean parts with quick cleaner (Art. No. 3318).
After the solvent has evaporated, apply a thin coat of the paste to the cleaned areas.

Note
Do not apply the paste to the friction surfaces of the brake pads or brake discs!

Liqui Moly 21277 Active Foam Cleaner

Highly effective, all-purpose foam cleaner for effective cleaning of a wide range of materials. Effortlessly cleans smooth surfaces without leaving streaks or smears thanks to its active formula. Also ideal for vertical surfaces thanks to its highly adhesive foam.

 Properties
- Universally applicable
- For interior and exterior cleaning
- streak-free cleaning
- highly effective

Application

For cleaning smooth surfaces made of aluminium, stainless steel, plastic, glass, chrome and rubber indoors and outdoors.

• 
  Danger
  Safety data sheet available on request.Sicherheitsdatenblatt auf Anfrage erhältlich.Extremely flammable aerosol.Extrem entzündbares Aerosol.Pressurised container: may burst when heated.Behälter steht unter Druck: kann bei Erwärmung bersten.Causes serious eye irritation.

LIQUI MOLY 3825 Motorbike Gear Oil 75W-90 1 litre

Fully synthetic high-pressure gear oil of performance class API GL-5 based on high-quality base oils and additives. Ensures easy, precise shifting even under extreme conditions and offers excellent protection against wear and optimum viscosity-temperature behavior. For transmissions and final drives with maximum loads. The regulations of the gearbox manufacturer must be observed.
Application
The regulations of the gearbox manufacturer must be observed. Can be mixed with all branded gear oils. Optimum effect only in unmixed condition.
releases
API GL5, MIL-L 2105 C, MIL-L 2105 D

• EUH208 Enthält Reaktionsprodukte von Bis(4-methylpentan-2-yl)dithiophosphorsäure mit Phosphoroxid, Propylenoxid und Aminen, C12-14-alkyl (verzweigt). Kann allergische Reaktionen hervorrufen.
• EUH210 Sicherheitsdatenblatt auf Anfrage erhältlich.

Liqui Moly Pro-Line Diesel Particulate Filter Protection 1 litre

Highly effective additive that reduces soot formation and improves the operational reliability of diesel particulate filters. Short-haul and urban vehicles in particular are affected by the problem of clogged diesel particulate filters. Regular use keeps the diesel particulate filter clean and avoids expensive repairs and downtimes. Ensures optimum combustion of the fuel and reduces soot formation. This helps to reduce emissions.

Suitable for diesel vehicles with diesel particulate filters, provided they are not already equipped with an electronically controlled additive tank system for filter regeneration, as is the case with Citroën and Peugeot, for example. Also suitable for commercial vehicles and buses. Can content (1 litre) is sufficient for 300 litres of diesel fuel.

Application

Add to the fuel immediately every 2,000 km before refuelling. Can content (1 litre) is sufficient for 300 litres of diesel fuel. Note: Avoid overdosing and joint application with Diesel Soot Stop!

Important information on the disposal of used oil: You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes) in the amount of fresh oil bought from us free of charge at our point of sale during operating hours: Return Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to:

B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen

Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations of the shipping company, since waste oil is dangerous. If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence