Active solvent with a highly effective combination of additives. Removes dirt and deposits in the diesel intake and throttle valve area. Dissolves and removes contaminants such as oil, resin, soot, etc. Ensures the functionality of moving parts and increases the operational safety of diesel engines. Create access to the suction system. This should be as close as possible to the engine and after the air mass meter. Start the engine to begin cleaning. If the engine cannot maintain the speed with the intake pipe removed or cannot be started, disconnect the connector from the air mass meter with the ignition switched off. In this case, the stored fault must be deleted from the engine control unit after cleaning using a suitable diagnostic device and the air mass meter must be relearned if necessary. Spray the diesel intake system cleaner into the intake system using a spray probe at short intervals of 2-3 seconds at a minimum of 2,000 revolutions. Move the probe back and forth to clean the entire intake tract. If the speed increase of more than 1,000 revolutions occurs during use, it is important to stop the spraying process immediately. Note that the diesel intake system cleaner must not come into contact with the air mass meter or with painted components. If there are stubborn deposits on the EGR valve, in the intake manifold or on the intake valves, cleaning can be repeated with a second can. Do not remove the spray head from the can after installation. After use, let the engine run for approx. 20 seconds at at least 2,000 revolutions in order to burn off any residues left in the intake system. For cleaning the entire intake system. Recommended for preventive use during inspection. Only for use in diesel engines!

   

• Behälter steht unter Druck: Kann bei Erwärmung bersten.

• Extrem entzündbares Aerosol.

• Giftig für Wasserorganismen, mit langfristiger Wirkung.

• Kann Schläfrigkeit und Benommenheit verursachen.

• Kann bei Verschlucken und Eindringen in die Atemwege tödlich sein.

• Verursacht schwere Augenreizung.

• Wiederholter Kontakt kann zu spröder oder rissiger Haut führen

Important information on the disposal of used oil: You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes) in the amount of fresh oil bought from us free of charge at our point of sale during operating hours: Hand it in Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to: B + F Lubricant GmbH, Am Gewerbehof 13, 50170 Kerpen Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations of the shipping company, since waste oil is dangerous. If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence

Removes deposits on injection nozzles and in the combustion chamber. Increases the cetane number. Eliminates engine running problems such as nailing when idling and ensures smooth and smooth engine operation. Protects the entire fuel system from corrosion. Optimizes the AU values. Can also be used preventively. Clean engines use less fuel and reduce pollutant emissions. Suitable for all diesel engines with and without diesel particulate filters. As a preventative measure at every inspection, after repairs to the fuel system or for troubleshooting (see application description on the container or in the technical data sheet). Turbo tested. Completely compatible with all conventional diesel and biodiesel fuels. Can content is sufficient for up to 75 liters of fuel.

Important information on the disposal of used oil: You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes) in the amount of fresh oil bought from us free of charge at our point of sale during operating hours: Return Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to: B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations of the shipping company, since waste oil is dangerous. If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence

A 250ml can for a maximum of 70 liters of diesel fuel. Mix the contents of the can with the diesel fuel. Mixing also takes place independently. Suitable for all diesel engines with and without diesel particulate filters and express vans Turbo and catalytic converter tested For direct addition to the fuel tank Completely compatible with all conventional diesel and biodiesel fuels To improve the acceleration behavior and increase the smoothness characteristics This state-of-the-art fuel additive was specially developed to noticeably improve acceleration in the partial load range Ensures more driving fun through optimized power output The engine starts better and also runs more smoothly

Important information on the disposal of used oil: You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes) in the amount of fresh oil bought from us free of charge at our point of sale during operating hours: Return Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to: B + F Lubricant GmbH, Am Gewerbehof 13, 50170 Kerpen Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations of the shipping company, since waste oil is dangerous. If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence

Versatile, e.g. B. on plastics, rubber, metal, wood, etc. Serves as an assembly aid, for example with hose connections and seals. For indoor and outdoor.

Mineral oil and grease-free release agent, lubricant and protective agent based on silicone. Protects, lubricates, maintains and insulates. Does not cause stains. Has an antistatic effect (repels dust). Eliminates squeaks, creaks and sluggishness. Offers long-lasting protection against wear. Versatile, especially in work areas where lubricants containing oil or grease are undesirable or interfere with subsequent post-processing.

Further information:

application
Spray the components to be treated thinly and evenly. Repeat the treatment if necessary. Do not use in the vicinity of painting stations. Do not spray on food or machine parts that come into direct contact with food. The fold-out spray tube guarantees precise spraying. If the spray lance remains folded in, extensive spraying is possible. Also sprays overhead.
Content 400 ml
Technical characteristics
pleasant smell
eliminates squeaks
excellent release agent for inert gas welding
impregnated
isolated
clean application
Protection and care of all plastics

Important information on the disposal of used oil: You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes) in the amount of fresh oil bought from us free of charge at our point of sale during operating hours: Return Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to: B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations of the shipping company, since waste oil is dangerous. If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence

Motul KÜHLER REINIGER // RADIATOR CLEAN   300ml

Removes debris throughout
Cooling circuit.

Protects the environment by optimizing the
Engine power.

Protects the engine by improving the
Heating and cooling capacity.

Ensures cost savings through the extension
the life of the cooling system.

APPLICATION:
reaction time
Approx. 30 minutes
scope of application
All cooling systems
consumption
300 ml for up to 10 l
Application interval
With every coolant change

Ultra high performance engine oil, specially developed for the latest generation of "DRIVE-E"
Petrol (VEP *) and diesel engines (VED **) from VOLVO. Also suitable for modern
Gasoline engines, where an engine oil according to ACEA A1 / B1 or ACEA C5 in the ultra-low viscosity class SAE 0W-20 is intended.
SPECIFICATIONS / STANDARDS
STANDARDS: ACEA C5
APPROVALS: Volvo Car Corporation RBS0-2AE
With the VCC RBS0-2AE, the engine oil must have an extremely high thermal load capacity
simultaneous optimal compatibility with the most modern exhaust aftertreatment systems
show low pollutants according to Euro-6. The particularly high requirements also apply
in terms of the flow behavior at very low temperatures to improve the
Cold start behavior and the reduction of CO2 emissions and fuel consumption. Here is
a demonstrable fuel consumption reduction of 3.4% compared to a reference oil in the
Viscosity SAE 15W40 required.
ACEA A1 / B1 (obsolete since 12/2018) describes Fuel Economy Full SAPS engine oils
significantly reduced HTHS viscosity (≥ 2.6 mPa * s). This will reduce fuel consumption
by ≥ 2.5% compared to a reference oil (RL191) with a viscosity of 15W40.
ACEA C5 describes Fuel Economy Mid SAPS engine oils with significantly reduced HTHS viscosity (≥ 2.6 mPa * s), xW-20, proven Fuel Economy ≥ 3.0%.
The approval VCC RBS0-2AE is specified especially for the service fill for all VOLVO models with "DRIVEE" drives of the VEA petrol and diesel engine family (Volvo Engine Architecture).
The layout of the lubrication circuit is for the modular 4-cylinder petrol and
Diesel engines with 2.0L displacement are identical. A fully variable oil pump with a solenoid valve,
which regulates the oil pressure depending on the speed, load and temperature, takes care of all
Operating conditions for optimal lubrication and minimizes losses in the lubrication circuit.
ADVANTAGES FOR THE ENGINE AND THE ENVIRONMENT
Ultra-low-viscosity viscosity class SAE 0W20, perfect cold flow behavior already enables in
excellent wear protection during the cold start phase.
Specially developed for the most modern, friction-optimized downsizing engine concepts.
High-quality synthetic raw materials guarantee a long service life and protect the
Engine even with long oil change intervals.
High lubrication security even under extreme thermal and mechanical loads.
Extremely low evaporation loss reduces oil consumption.
Significantly reduced HTHS viscosity and excellent smooth running properties are made possible
a noticeable fuel saving.
Clean combustion, no black sludge, excellent corrosion protection, thereby
perfect engine cleanliness.
High shear stability guarantees stable oil pressure under all operating conditions, protects the
Engine reliable against wear.
RECOMMENDATIONS AND NOTES
Change interval according to the specifications of the vehicle manufacturer or adapted depending on
Operating conditions.
Before use, it is essential to read the manufacturer's service documents and recommendations!
VEP * VOLVO Engine Patrol - Volvo petrol engine

»Note on the waste oil regulation:
Important information on the disposal of used oil:
You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes)
in the amount of fresh oil bought from us free of charge at our point of sale during operating hours:
Hand it in Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to:

B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen

Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations
of the shipping company, since waste oil is dangerous.
If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence.

Ultra high performance engine oil, specially developed for the latest generation of "DRIVE-E"
Petrol (VEP *) and diesel engines (VED **) from VOLVO. Also suitable for modern
Gasoline engines, where an engine oil according to ACEA A1 / B1 or ACEA C5 in the ultra-low viscosity class SAE 0W-20 is intended.
SPECIFICATIONS / STANDARDS
STANDARDS: ACEA C5
APPROVALS: Volvo Car Corporation RBS0-2AE
With the VCC RBS0-2AE, the engine oil must have an extremely high thermal load capacity
simultaneous optimal compatibility with the most modern exhaust aftertreatment systems
show low pollutants according to Euro-6. The particularly high requirements also apply
in terms of the flow behavior at very low temperatures to improve the
Cold start behavior and the reduction of CO2 emissions and fuel consumption. Here is
a demonstrable fuel consumption reduction of 3.4% compared to a reference oil in the
Viscosity SAE 15W40 required.
ACEA A1 / B1 (obsolete since 12/2018) describes Fuel Economy Full SAPS engine oils
significantly reduced HTHS viscosity (≥ 2.6 mPa * s). This will reduce fuel consumption
by ≥ 2.5% compared to a reference oil (RL191) with a viscosity of 15W40.
ACEA C5 describes Fuel Economy Mid SAPS engine oils with significantly reduced HTHS viscosity (≥ 2.6 mPa * s), xW-20, proven Fuel Economy ≥ 3.0%.
The approval VCC RBS0-2AE is specified especially for the service fill for all VOLVO models with "DRIVEE" drives of the VEA petrol and diesel engine family (Volvo Engine Architecture).
The layout of the lubrication circuit is for the modular 4-cylinder petrol and
Diesel engines with 2.0L displacement are identical. A fully variable oil pump with a solenoid valve,
which regulates the oil pressure depending on the speed, load and temperature, takes care of all
Operating conditions for optimal lubrication and minimizes losses in the lubrication circuit.
ADVANTAGES FOR THE ENGINE AND THE ENVIRONMENT
Ultra-low-viscosity viscosity class SAE 0W20, perfect cold flow behavior already enables in
excellent wear protection during the cold start phase.
Specially developed for the most modern, friction-optimized downsizing engine concepts.
High-quality synthetic raw materials guarantee a long service life and protect the
Engine even with long oil change intervals.
High lubrication security even under extreme thermal and mechanical loads.
Extremely low evaporation loss reduces oil consumption.
Significantly reduced HTHS viscosity and excellent smooth running properties are made possible
a noticeable fuel saving.
Clean combustion, no black sludge, excellent corrosion protection, thereby
perfect engine cleanliness.
High shear stability guarantees stable oil pressure under all operating conditions, protects the
Engine reliable against wear.
RECOMMENDATIONS AND NOTES
Change interval according to the specifications of the vehicle manufacturer or adapted depending on
Operating conditions.
Before use, it is essential to read the manufacturer's service documents and recommendations!
VEP * VOLVO Engine Patrol - Volvo petrol engine

»Note on the waste oil regulation:
Important information on the disposal of used oil:
You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes)
in the amount of fresh oil bought from us free of charge at our point of sale during operating hours:
Hand it in Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to:

B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen

Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations
of the shipping company, since waste oil is dangerous.
If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence.

• Total Quartz 9000 5W-40 Internationale Spezifikationen:	ACEA A3/B4  API SN/CF
  Freigaben:	PSA Peugeot Citroën B71 2296  VW 502.00/505.00 MB-Freigabe 226.5  MB-Freigabe 229.5  Porsche A40
  Total empfiehlt den Einsatz bei:	VW 501.01, 500.00  Fiat 9.55535-H2/N2/M2 Hyundai  Chrysler MS-12991 Renault RN 0700, 0710

• »Note on the waste oil regulation:
  Important information on the disposal of used oil:
  You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes)
  in the amount of fresh oil bought from us free of charge at our point of sale during operating hours:
  Hand it in Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to:

  B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen

  Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations
  of the shipping company, since waste oil is dangerous.
  If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points in your place of residence.

Total QUARTZ INEO ECS 5W-30 is developed for gasoline and diesel engines, especially PEUGEOT and CITROEN u.a. for fuel-efficient use.

The INEO ECS 5W-30 clearly exceeds the standardized requirements of ACEA C2 and is especially recommended by PSA for all engines with / without exhaust aftertreatment system (DPF).

Total QUARTZ INEO ECS 5W-30 provides the longest possible service life of exhaust aftertreatment systems, such as catalytic converters or particulate filters, and with the modern "Fuel Economy" formulation, it can be used year round, even under the toughest conditions.

Characteristics:

Significant fuel savings through the optimized additives, yet with the best possible protection of all moving parts.

ECS_EmissionControlSystem: The special formulation has a positive effect on exhaust emissions, especially CO2 emissions.

Adhesions to flaps and valves (e.g., EGR) are avoided, allowing the systems to function optimally.

Specifications & Approvals:

ACEA C2, A5 / B5

PSA PEUGEOT CITROEN B71 2290

- QUARTZ INEO ECS is the only low SAPS oil recommended by PSA. It far exceeds the requirements of ACEA C2 and is also recommended for:

FIAT 9.55535-S1

TOYOTA

Note on the waste oil regulation:
Important information on the disposal of used oil:
You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes)
in the amount of fresh oil bought from us free of charge at our point of sale during operating hours:
Hand it in Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to:

B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen

Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations
of the shipping company, since waste oil is dangerous.
If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points where you live.

Total QUARTZ 9000 ENERGY 0W-30 was developed based on the TOTAL synthesis technology, i.a. for sporty driving under all operating conditions (short-distance, overland, highway). QUARTZ 9000 ENERGY is suitable for year-round use even at the lowest temperatures.

Specifications & Approvals:
ACEA A3 / B4-08
API SL / CF
MB 229.5
VW 502.00 / 505.00
VW 501.01, 500.00
TOTAL recommends use with:
BMW LL-01
OPEL / SAAB GM-LL-A-025
OPEL / SAAB GM-LL-B-025
FIAT 9.55535-M2
FIAT 9.55535-N2
Characteristics:
Excellent flowability at the lowest temperatures ensure a safe cold start with minimal wear on moving parts.
Extremely stable lubricating film even at high operating temperatures.
Best wear protection of the mechanical units ensure a long service life of the motors.
The good cleaning properties allow long maintenance intervals.

Note on the waste oil regulation:
Important information on the disposal of used oil:
You can remove your used oil (combustion engine oils, gear oils, oil filters and oil-containing waste that regularly occurs during oil changes)
in the amount of fresh oil bought from us free of charge at our point of sale during operating hours:
Hand it in Monday to Friday 9 a.m. to 4 p.m. or at your own expense in packaging approved for the transport of dangerous goods to:

B + F Schmierstoff GmbH, Am Gewerbehof 13, 50170 Kerpen

Send for free disposal. Any transport costs incurred are at the expense of the buyer. Please note the transport regulations
of the shipping company, since waste oil is dangerous.
If you change the oil, we recommend that you dispose of the used oil at the appropriate collection points where you live.